Catalogue Process GB 2020

52 ASSEMBLE RING FASTENING FOR BEARINGS 1310F3 50 ml bottle 1310F5 250 ml bottle 1310S1 5 kg container  green Handling time: 3 to 5 mn Shearing strength: +150°C >25 N/mm 2 T°: -60 to 1312T2 50 g tube  grey Handling time: 20 to 45 mn Shearing strength: > 20 N/mm 2 T°: -60 to +150°C 1314F3 50 ml bottle 1314F5 250 ml bottle 6314F3 PMUC 50 ml bottle  green Handling time: on steel 10 to 25 mn T°: -60 to +150°C Shearing strength: >20 N/mm 2 PMUC: 16-050 1313F3 50 ml bottle 1313F5 250 ml bottle  green Handling time: on steel 10 to 25 mn T°: -60 to +150°C Shearing strength: >20 N/mm 2 1316F3 50 ml bottle 1316F5 250 ml bottle  green Handling time: 10 to 30 mn on steel T°: -60 to +150°C Shearing strength: > 25 N/mm 2 REPAIRS DEFORMED PARTS VERY STRONG AND QUICK FASTENING Very resistant to radial, axial and dynamic stresses. Helps extend machining tolerances recommended for clearance values of 0.15 to 0.25mm. Can be used as very strong, quick-setting sealant. Recommended for assemblies that cannot be dismantled. STRONG FASTENING - GAP < 0.05MM Paste product advised for repairing, without machining, used cylinder-shaped pieces with high and even irregular gap (0.25 to 0.5mm). Resists to impacts and vibrations. For bearings’ housing gone oval, repairing of shafts with wear or scratches. Always used with ACTIVATEUR 3140. Fluid resin recommended for small gaps. Fastening of rings, pulleys, bearings etc. with high shearing strength. STRONG FASTENING - MEDIUM GAP Strong resistance for radial, axial and dynamic stresses. Recommended for gaps from 0.15 to 0.25 mm, on assemblies that cannot be dismantled: fastening of drive shafts, pinions, pulleys etc. 310 312 313 316 STRONG RESISTANCE, WITHSTANDS OIL For application on pieces where degreasing cannot be perfect. Advised for gaps < 0.15mm. Fastening of rings, inserts, pulleys, bearings, cylinder liners etc. with high shearing strength. 314 PREPARATION I I THREAD LOCKING FIXING I SEALING I